AuKing wins bid for Saudi gold exploration licence
Released
Released
Announcement PDF
Auking Mining Limited
ASX:AKN
Suite 34, Level 10
320 Adelaide Street
Brisbane Queensland 4000
ABN 29 070 859 522
Phone 07 3535 1208
www.aukingmining.com
6 November 2024
ASX RELEASE
AuKing wins bid for Saudi gold exploration licence
AuKing Mining Limited (ASX: AKN) is pleased to advise that, together with local Saudi
Arabian partner, Barg Alsaman Mining Company (BSMC), it has been successful in
securing the “Shaib Marqan” exploration licence as part of the Saudi Ministry of
Industry and Mineral Resources’ 6th Licensing Round bid process.
HIGHLIGHTS
The Saudi Ministry of Industry and Mineral Resources (Ministry) issued an Information
Memorandum dated 5 August 2024 (IM) as part of the 6th Licensing Round bid process. The
following highlighted information was included in the IM in relation to Shaib Marqan:
•
The Project is considered highly prospective for orogenic vein-hosted gold
mineralization and is significantly under-explored. The Al Amar gold mine is 100km to
the north-west and produced nearly 30,000oz Au in 2022 (Ma’aden Gold).
•
At least 22 ancient workings over quartz veins have been noted in the area, with 50
vein and wall-rock samples averaging ~ 5.8g/t Au, with a maximum of 40g/t Au.
•
The quartz veins have lengths of up to 300m, with widths of up to 10m being
reported.
Managing Director, Paul Williams commented: “AuKing is very pleased to have secured
the Shaib Marqan exploration licence with its local partner BSMC. We understand that this
6th Bidding Round has been the subject of significant interest from companies around the
world and it is an honour to be recognized by the Ministry with this successful bid. Shaib
Marqan is situated in a highly mineralized area within the famous Arabian-Nubian Shield
geological region and is situated within close proximity to various established deposits.
Systematic exploration across the licence area could lead to the rapid identification of a
significant mineral deposit within the Ar Rayn Terrane”, he said.
We will now commence work with both the Ministry and our local Saudi partner, BSMC, to
seek to finalise the grant of the formal Shaib Marqan exploration licence over the next
several weeks”, Mr Williams said.
1
Saudi Arabia’s Mining Sector Expansion
Saudi Arabia’s Vision 2030 reform agenda has elevated the mining sector’s role in the Saudi
economy, positioning it as a third key economic pillar as part of the National Industrial
Development and Logistics Program. The Kingdom’s focus on mining is driven by a desire to
diversify the economy and increase non-oil revenue as it weans itself off oil dependence.
Furthermore, minerals are key inputs in many industries essential to Vision 2030 objectives,
such as achieving a green transition, digitizing the economy, becoming a global hub for
technology and connectivity, producing nuclear energy, and localizing military procurement.
The new mining law that came into effect in 2021 targets the exploitation of the Kingdom’s
mineral resources and the development of its mineral-based manufacturing industry, all of
which are aimed at reducing imports to the Kingdom by circa $10Billion and generate more
than 200,000 jobs by 2030.
Shaib Marqan Gold Project
Shaib Marqan is situated in central Saudi Arabia and covers an area of 91.8km2. The project
area is around 240km south-west of Riyadh and is part of the Ar Rayn Terrane along the
eastern margin of the Arabian-Nubian Shield (ANS). Despite being smaller than other
terranes within the ANS, the Ar Rayn Terrane is known for hosting multiple mineral systems
and mineral commodities, including volcanogenic massive sulfide (VMS)-hosted copper and
zinc, epithermal and orogenic gold, and iron oxide copper/gold (IOCG) deposits.
Ancient workings have been documented throughout the Al Amar Belt, concentrating mainly
on quartz veins with disseminated pyrite. The area was first mapped in 1956, with
intermittent exploration occurring between 1970 and 1994.
The Ar Rayn Terrane in general has been the focus of exploration activities since the 1950’s.
Notably, the Al Amar Au-Ag-Zn-Cu deposit, the Khnaiguiyah Zn-Cu-iron-manganese deposit
and the Jabal Idsas magnetite prospect are all hosted within the Ar Rayn Terrane. The Al
Amar Mine is located 100km northwest of Shaib Marqan project area and produced 27,443
ounces Au in 2022 (Ma’aden, 2022).
Previous exploration within the Ar Rayn Terrane includes mapping, regional geophysical
surveying, and geochemical sampling of a single mineral occurrence within the KSA’s
Mineral Occurrence Documentation System (MODS). Shaib Marqan stands out as a
relatively under-explored area of the Ar Rayn Terrane in close proximity to several
established deposits. Based upon the previous exploration work in the region, further
systematic exploration activities could lead to the rapid generation of new precious and base
metals targets.
2
Figure 1 – Al Amar Belt and Al Amar Gold Mine; Shaib Marqan (outlined in black) is located
to the south-east
Proposed BSMC Joint Venture
As announced earlier this year, AuKing has entered into a Memorandum of Understanding
with BSMC (MOU), a member of the Segia Gulf Group, a large Saudi Arabian group that has
had more than 40 years of operating experience in the Kingdom, mostly in the construction
sector. In recognition of the substantial growth in the Saudi mining sector, BSMC has
recently turned its focus towards securing projects that have the potential for significant
mineral exploration and development, particularly in the western region of Saudi Arabia.
3
The purpose of the MOU was for the joint exploration and development of mineral projects
in Saudi Arabia. Key features of the MOU include the following:
•
•
•
•
•
The focus of the co-operation with BSMC is gold, copper, silver and zinc projects;
BSMC will make available to AuKing the opportunity to participate in existing projects
owned by them, as well as to jointly bid for new projects that are offered by the
Government from time to time;
AuKing is intended to sole fund exploration and development activities on selected
mineral projects (including Shaib Marqan) up to the point of completion of a feasibility
study;
The interests of the parties will be allocated on a 70/30 basis as between AuKing and
BSMC; and
BSMC will assist AuKing (on a best endeavours basis) with all necessary local
administration and logistical arrangements in Saudi Arabia and to raise funds for
project activities.
Figure 2 – Simplified geological map of the Arabian Shield, with the locations of key mines
within the KSA. Major tectonostratigraphic terranes are delineated by suture and major fault
zones. The Shaib Marqan project is located within the Ar Rayn Terrane, toward the eastern
edge of the Figure.
4
Grant of Exploration Licence
AuKing has received formal notification of the successful tender for the Shaib Marqan
licence area from the Ministry. Discussions will now proceed over the next few weeks with a
view to finalizing the terms of the grant of exploration licence by the Ministry in relation to
Shaib Marqan. Under the terms of the AuKing/BSMC bid, a minimum exploration
commitment (for the first two years of activities) of US$1.2M was submitted, together with
details of the proposed activities – much of which will depend on the extent of successful
exploration results. Further details about the exploration licence grant will be provided as
and when arrangements are finalized with the Ministry.
ASX Disclosure re Historical Exploration Results
This ASX release contains information derived from public disclosures obtained from an
Information Memorandum dated 5 August 2024 and published by the Ministry of Industry
and Mineral Resources of the Kingdom of Saudi Arabia.
In accordance with ASX disclosure requirements the following additional matters need to be
noted:
• The historical exploration results reported in this release were made by companies
other than AuKing;
• Copies of the historical exploration results can be obtained from the National
Geoscience Databased of Saudi Arabia;
• The historical exploration results may not conform to the requirements in the JORC
Code 2012;
• AuKing’s Competent Person believes that due to these historical exploration results
relating to very early-stage activities it is reasonable to rely on these results in the
manner presented in this release;
• AuKing intends (from now on) to report its own exploration results after the conduct
of planned activities in accordance with the JORC Code 2012, utilizing the historical
exploration results as a general background rather than the basis for future reporting;
• Proposed future activities at Shaib Marqan will at least involve initially the conduct of
a significant soil sampling program;
• A statement by Mr Chris Bittar, Competent Person is set out below;
• A cautionary statement in relation to the historical exploration results included in this
release is set out above; and
• AuKing has no other reason to suspect that the historical exploration results as
reported in this release are misleading.
For more information, please contact:
Paul Williams
Managing Director
Mobile +61 419 762 487
p.williams@aukingmining.com
5
ANNEXURE A
Historical sample results from the Shaib Marqan project area
Sample
Long DD
MODS0106 45.39981
Lat DD
Geology
Mineralisation Style
Comments
22.917
Granite;
quartz
diorite
Auriferous quartz
vein; Low sulphide
Au-quartz Vein
No information
MODS0108 45.40425 22.90678
Diorite;
Quartz
Low-sulphide AuQuartz Vein;
Hydrothermal
Samples
collected from
dumps and
sides of veins
had grades of 115g/t Au, with a
single sample
returning 40 g/t
(Bois and
Shanti, 1970)
MODS4316 45.40608 22.91617
Diorite
Unconformity U-Au
No information
MODS6002
Quartz
Unclassified
No information
45.3725
22.88228
Source: National Geoscience Database of Saudi Arabia
Competent Persons’ Statement
The information in this report that relates to exploration results at the Shaib Marqan Project
in Saudi Arabia is based on information compiled by Mr Chris Bittar who is a member of the
Australasian Institute of Mining and Metallurgy. Mr Bittar is an employee of AuKing Mining
Limited and has sufficient experience which is relevant to the style of mineralisation and type
of deposit under consideration and to the activity which they are undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves.’ Mr Bittar consents to the
inclusion in the report of the matters based on his information in the form and context in
which it appears.
6
JORC Code, 2012 Edition – Shaib Marqan Gold Exploration Licence
This Table 1 contains information derived from public disclosures obtained from an
Information Memorandum dated 5 August 2024 and published by the Ministry of Industry
and Mineral Resources of the Kingdom of Saudi Arabia.
Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
JORC Code explanation
• Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done
this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 0.5 m
samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as
where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drilling
techniques
•
Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
•
Not applicable
Drill sample
recovery
•
Method of recording and assessing core and chip
sample recoveries and results assessed.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the relevant
intersections logged.
If core, whether cut or sawn and whether quarter,
half or all core taken.
•
Not applicable
•
The geology (where available) of specific
samples is described in the associated
technical reports and also summarised in the
Table in Annexure A of the announcement.
•
Information about sub-sampling techniques is
not available in the Technical Reports.
•
•
Logging
•
•
•
Sub-sampling
techniques
•
Commentary
•
The National Geoscience Database of Saudi
Arabia reports rock chip, channel, dump and
stream sampling documented in technical
reports by Bois and Shanti (1970) and
Coulomb (1983).
7
Criteria
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification of
sampling and
assaying
Location of
data points
Data spacing
and
distribution
Orientation of
data in
relation to
geological
structure
Sample
security
Audits or
reviews
JORC Code explanation
• If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
• Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been
established.
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations used
in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
•
•
•
•
•
•
•
Commentary
•
This information is not available
•
No verification conducted.
•
No information is available in the Technical
Reports to address this subject.
Co-ordinate information for the MODS has
been provided by the KSA Ministry of Industry
and Resources and has been reproduced from
third-party sources.
•
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
If the relationship between the drilling
orientation and the orientation of key mineralised
structures is considered to have introduced a
sampling bias, this should be assessed and
reported if material.
The measures taken to ensure sample security.
•
The results of any audits or reviews of sampling
techniques and data.
•
Data obtained from the technical Reports is
preliminary in nature and is not sufficient for
Minerals Resource estimation purposes.
•
The location and orientation of the rock chip
sampling was based on the geological features
observed at surface.
•
No information is available to assess measures
taken to ensure sample security.
No independent audit or review has been
undertaken to date.
8
Section 2 Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a license to operate in the area.
Exploration
done by other
parties
•
Acknowledgment and appraisal of exploration by
other parties.
Geology
•
Deposit type, geological setting and style of
mineralisation.
Drill hole
information
• A summary of all information material to the
under-standing of the exploration results
including a tabulation of the following
information for all Material drill holes:
• easting and northing of the drill hole collar
• elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
• dip and azimuth of the hole
• down hole length and interception depth
• hole length
• If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent Person
should clearly explain why this is the case.
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high
Data
aggregation
methods
Commentary
•
The Shaib Marqan project is located in the
central region of the Kingdom, of Saudi Arabia,
approx. 240 km south-west of Riyadh in
central Saudi Arabia.
•
There is proposed to be one (1) new
Exploration Licence formally issued by the
Ministry at completion of the 6th Round
Bidding process.
•
There are no known third-party interests
affecting the proposed Exploration Licence.
•
The majority of exploration work within Shaib
Marqan has been conducted by the Bureau de
Recherche’s Geologiques et Minière’s (BRMG),
beginning in 1956, with further mapping,
sampling, petrography, airborne magnetic and
scintillometer surveys completed in 1970. In
1983 BRGM conducted soil rock sampling,
channel sampling, dump sampling, stream
sediment sampling.
•
Detailed geological mapping of the Wadi Al
Mulayh Quadrangle (Sheet 22H was
completed in 1984.
•
Total-intensity aeromagnetic maps of the
Arabian Shield were completed in 1985.
•
The project is located on the Arabian-Nubian
Shield (ANS) within the Ar Rayn Terrane.
•
The Ar Rayn Terrane comprises of mainly
syn-to
post-tectonic
tonalitic
and
granodioritic gneisses that intrude tholeiitic to
calc alkaline volcanic rocks of the Al Amar
group.
•
The Shaib Marqan project is dominated by
volcanic rocks Syn to post tectonic tonalite,
diorite, gabbro, rhyolite tuff, marble and
andesite of the Shalahib formation of the Al
Amar Group.
•
Regional
mineralisation
is
primarily
epithermal Au, with the Al Amar deposit being
the most notable example.
•
Mineralisation with the Shaib Marqan project
area is hosted within metre-thick and 300m
long auriferous quartz veins inside granitic
and intrusive massifs
•
Not applicable
•
No information is available in the Technical
Reports to provide details on the methods
applied.
9
Criteria
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
Reporting
Other
substantive
exploration
data
Further work
JORC Code explanation
grades) and cut-off grades are usually Material
and should be stated.
• Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown
in detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
• These relationships are particularly important in
the reporting of Exploration Results.
• If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should
be reported.
• If it is not known and only the down hole lengths
are reported, there should be a clear statement to
this effect (e.g. ‘down hole length, true width not
known’).
Commentary
•
Not applicable
• Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for
any significant discovery being reported. These
should include, but not be limited to a plan view of
drill hole collar locations and appropriate
sectional views.
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations used
in Mineral Resource estimation.
• Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting
of both low and high grades and/or widths should
be practiced to avoid misleading reporting of
Exploration Results.
• Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations; geophysical
survey results; geochemical survey results; bulk
samples - size and method of treatment;
metallurgical test results; bulk density,
groundwater,
geotechnical
and
rock
characteristics;
potential
deleterious
or
contaminating substances.
• The nature and scale of planned further work (e.g.
tests for lateral extensions or depth extensions or
large- scale step-out drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main geological
interpretations and future drilling areas,
provided this information is not commercially
sensitive.
•
Diagrams have been included within the main
body of text.
•
Reporting is consistent with the available
data and information that is available from
the National Geoscience Database of Saudi
Arabia. Furthermore, the data included in
this Report are preliminary in nature only
and not relevant for Mineral Resource
estimation purposes.
•
No other substantive data is available in the
Technical Reports.
•
This is expected to include a comprehensive
rock chip sampling program.
10
Share your feedback
Discover