Promising Initial XRF Analysis from Itigi Uranium Project
Released
Released
Announcement PDF
Auking Mining Limited
ASX:AKN
Suite 2208, Level 22
127 Creek Street
Brisbane Queensland 4000
ABN 29 070 859 522
Phone 07 3535 1208
www.aukingmining.com
10 July 2023
ASX RELEASE
Promising initial XRF analysis from Itigi Uranium Project
drilling
Highlights
• Drilling program at Itigi is now well underway and promising results have been
identified from initial XRF analysis.
• A total of 925 m of air core drilling has been completed to date, across 63 holes
to a maximum depth of 15 m below surface.
• Initial XRF analysis has indicated anomalous uranium mineralization across
several holes currently drilled, up to maximum reading of 338ppm U3O8.
• Samples are being prepared for laboratory analysis, with assay results expected
within 8-10 weeks.
• A further 1300 m of air core drilling is planned at Itigi, prior to commencement
of auger drilling across certain other priority areas of the Project.
Cautionary Statement
The company uses an Olympus Vanta portable hand-held XRF analyzer to screen Air-Core
samples for mineralisation before submitting samples to the lab for assay. This allows for
some understanding of the distribution of mineralisation prior to sampling to better ensure
that samples submitted for analysis are representative of the type and style of mineralisation.
The hand-held XRF provides confirmation that mineralisation is present however it is not an
accurate determination of the elemental concentration within the sample anlaysed.
Limitations include; very small analysis window, possible inhomogeneous distribution of
mineralisation, analytical penetration depth, possible effects from irregular rock surfaces.
These results obtained from the hand-held XRF are indicative only and may not be
representative of elemental concentration within the material sampled. The pXRF readings
are subject to confirmation by chemical analysis from an independent laboratory.
1
AuKing Mining Limited (ASX: AKN) has identified promising initial XRF U3O8 results
from its planned 2000m exploration drilling program at the Itigi Uranium Project in
central Tanzania.
AuKing’s CEO, Mr Paul Williams, said that initial results from drilling at Itigi were encouraging
and provide the basis for more formal assays to be received within the next couple of
months.
“We are very pleased with the activities of our in-country exploration team at Itigi and good
progress is being made with our first drilling program in Tanzania. We remain hopeful that a
significant uranium deposit can be established at Itigi and these early XRF readings results
from near-surface drilling samples taken so far are in important first step. We now look
forward to receiving the formal lab assays in due course,” said Mr Williams.
Itigi Project Location
AuKing is the holder of a prospecting licence (“PL”) over the Itigi project area which is 80
km west of Manyoni, and in turn approximately 100 km west of the major city of Dodoma in
central Tanzania. Two other adjoining areas at Itigi are the subject of PL applications held by
AuKing.
Figure 1 – Itigi and Manyoni Project Location
Historical Itigi Exploration
2
On 29 January 2010 UNX announced details to ASX of an intense radiometric anomaly at a
project area called Itigi, approximately 50 km west of Manyoni. The anomaly extends over 40
km long and 10 km wide and in their 29 January 2010 release, UNX stated the following:
“This is the most intensive and extensive radiometric anomaly identified by Uranex during its
years of exploration in the Manyoni and Bahi region. Given its very favourable location, with
road and rail access to the Manyoni project area, it has the potential to substantially enhance
the development opportunity in the region.”
A significant amount of exploration activity was then undertaken by Uranex NL (“UNX”) up
until late 2010/early 2011, when priorities were then turned towards other minerals. In its
report to ASX titled “Tanzania Projects Update” lodged on 16 July 2010, UNX noted the
following observations about their activities at Itigi:
•
•
•
9 high priority targets identified;
More than 400 small exploration pits (dug to 3m below surface) with visible uranium
mineralisation identified in a significant number of these pits; and
Of the 400 pits, approx. 150 were measured using a portable field XRF, with results up
to 304ppm U3O8.
Itigi Licences
AuKing holds one granted PL and two PL applications in the Itigi region, as shown in Figure
2 below. All of these licence areas are situated across the radiometric anomaly and provide
an opportunity to substantially increase the existing uranium resources already identified at
the nearby Manyoni Project.
Figure 2 – Itigi Prospecting Licence areas
Itigi Drilling Program
3
Work commenced at the Itigi Project in late May and to date, with a total of nearly 925m of
air core (AC) drilling having been completed across 63 holes, to depths up to 15m where
bedrock is encountered.
AuKing’s exploration team has conducted initial XRF field measurements of the drilling
samples already obtained and identified anomalous U3O8 readings across several drill holes,
up to a maximum reading of 338ppm U3O8. Samples are now being prepared for shipment
to local laboratories for detailed assay analysis, which is expected to be received within 8-10
weeks.
AuKing intends to complete the planned 2000m Itigi drilling program over the next 2-3
weeks.
Note:
References above to XRF results relate to analysis using a hand-held device. This portable
device provides immediate analysis of modal mineralogy of drill samples. Unless otherwise
stated, values determined by XRF analysis are based on one spot reading per one half metre
of drill sample. As such, results from XRF analysis are stated as indicative only and are
preliminary to subsequent confirmation (or otherwise) by geochemical laboratory analysis.
Figure 3 – Air core drilling rig at Itigi
This announcement has been authorised by Paul Williams, CEO, AuKing Mining
Limited.
4
For more information, please contact:
Paul Williams
Chief Executive Officer
Mobile +61 419 762 487
p.williams@aukingmining.com
Gareth Quinn
Investor Relations
Mobile + 61 417 711 108
gareth@republicpr.com.au
Competent Persons’ Statement
The information in this report that relates to exploration results at the Itigi Project is based on
information compiled by Mr Chris Bittar who is a member of the Australian Institute of Mining and
Metallurgy. Mr Bittar is an employee of AuKing Mining Limited and has sufficient experience which is
relevant to the style of mineralisation and type of deposit under consideration and to the activity
which they are undertaking to qualify as a Competent Person as defined in the 2012 Edition of the
‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves.’ Mr
Bittar consents to the inclusion in the report of the matters based on his information in the form and
context in which it appears.
About AuKing Mining
AuKing Mining (ASX:AKN) is a mining exploration company focused on uranium, copper and zinc
projects in both Tanzania and Australia.
Our flagship Koongie Park Copper Zinc Project in Western Australia’s Halls Creek Region hosts a JORC
resource and is neighboured by several significant mining and development operations including Nicholson’s
Gold Mine, Panton PGM Project, and Savannah Nickel Mine. Koongie Park has already been the subject of
significant exploration drilling and analysis since the 1970’s, hosting over 300 RC and diamond drill holes
consisting of more than 60,000m of drilling in total. AuKing recently announced the results of its Koongie Park
Scoping Study on a proposal to commence mining operations around a central processing facility at Sandiego.
In January 2023, AuKing acquired several uranium and copper licences in Tanzania including:
Mkuju – near to the world class Nyota uranium project in southern Tanzania; the subject of significant previous
exploration
Manyoni/Itigi – the subject of significant historical exploration situated in central Tanzania, just west of Dodoma
Mpanda/Karema – prospective copper areas in western Tanzania that were the subject of historic mining
operations but largely untouched by modern exploration methods.
For further information
www.aukingmining.com
5
APPENDIX A – Drillhole Intersections
(Significant intersection summary at greater than 100ppm U cut-off grade.
Hole No.
From
(m)
To
(m)
Width
(m)
U (ppm)
ITAC23_030
1.5
3
1.5
114
ITAC23_031
1.5
3.5
2
182.5
incl.
1.5
2
0.5
338
APPENDIX B – Drill Collar Details
Hole ID
Plan Easting (WGS 84/
UTM zone 36S)
Planned Northing (WGS 84/
UTM zone 36S)
Plan RL
Dip
Azi
EOH Depth
Significant intercepts
(NSR = No Significant results)
(AA = Awaiting XRF analysis)
ITAC23_001
634797
9381478
1265
0
360
15
NSR
ITAC23_002
634797
9381278
1265
0
360
15
NSR
ITAC23_003
634800
9381080
1265
0
360
15
NSR
ITAC23_004
634803
9380884
1265
0
360
15
NSR
ITAC23_005
634798
9380680
1265
0
360
9
NSR
ITAC23_006
634800
9380474
1265
0
360
8
NSR
ITAC23_007
634799
9380294
1265
0
360
11
NSR
ITAC23_008
634795
9380096
1265
0
360
15
NSR
ITAC23_009
634803
9379896
1265
0
360
15
NSR
ITAC23_010
634798
9379694
1265
0
360
15
AA
ITAC23_011
634002
9381016
1265
0
360
15
AA
ITAC23_012
634000
9380814
1265
0
360
15
AA
ITAC23_013
633999
9380616
1265
0
360
15
AA
ITAC23_014
634002
9380414
1265
0
360
15
AA
ITAC23_015
633999
9380212
1265
0
360
15
AA
ITAC23_016
634000
9380020
1265
0
360
15
AA
ITAC23_017
634003
9379814
1265
0
360
15
AA
ITAC23_018
634000
9379616
1265
0
360
15
AA
ITAC23_019
633999
9379398
1265
0
360
15
AA
ITAC23_020
634001
9379214
1265
0
360
15
AA
ITAC23_021
630785
9379724
1265
0
360
15
AA
ITAC23_022
630788
9379524
1265
0
360
15
AA
ITAC23_023
630789
9379322
1265
0
360
15
AA
ITAC23_024
630787
9379124
1265
0
360
15
AA
ITAC23_025
630787
9378924
1265
0
360
15
AA
ITAC23_026
630791
9378722
1265
0
360
15
AA
ITAC23_027
630792
9378524
1265
0
360
15
AA
ITAC23_028
630789
9378324
1265
0
360
15
NSR
ITAC23_029
630791
9378124
1265
0
360
15
NSR
ITAC23_030
630789
9377928
1265
0
360
15
YES
ITAC23_031
630788
9377720
1265
0
360
15
YES
6
ITAC23_032
630792
9377518
1265
0
360
15
NSR
ITAC23_033
630787
9377324
1265
0
360
15
NSR
ITAC23_034
630780
9377124
1265
0
360
15
NSR
ITAC23_035
630787
9376926
1265
0
360
15
NSR
ITAC23_036
630785
9376726
1265
0
360
15
NSR
ITAC23_037
630788
9376524
1265
0
360
15
NSR
ITAC23_038
630789
9376326
1265
0
360
15
NSR
ITAC23_039
630792
9376126
1265
0
360
15
NSR
ITAC23_040
630789
9375922
1265
0
360
15
NSR
ITAC23_041
630790
9375728
1265
0
360
15
NSR
ITAC23_042
630389
9378472
1265
0
360
15
NSR
ITAC23_043
630390
9378312
1265
0
360
15
NSR
ITAC23_044
630393
9378152
1265
0
360
15
NSR
ITAC23_045
630399
9377992
1265
0
360
15
NSR
ITAC23_046
630394
9377834
1265
0
360
15
NSR
ITAC23_047
630395
9377672
1265
0
360
15
NSR
ITAC23_048
630393
9377510
1265
0
360
15
NSR
ITAC23_049
630399
9377346
1265
0
360
15
NSR
ITAC23_050
630393
9377188
1265
0
360
15
NSR
ITAC23_051
630391
9377032
1265
0
360
15
NSR
ITAC23_052
630395
9376868
1265
0
360
15
NSR
ITAC23_053
630393
9376716
1265
0
360
15
NSR
ITAC23_054
630395
9376551
1265
0
360
15
NSR
ITAC23_055
630396
9376402
1265
0
360
15
NSR
ITAC23_056
630393
9376236
1265
0
360
15
NSR
ITAC23_057
630392
9376072
1265
0
360
15
NSR
ITAC23_058
630000
9379200
1265
0
360
15
NSR
ITAC23_059
630000
9379000
1265
0
360
12
NSR
ITAC23_060
630000
9378800
1265
0
360
15
NSR
ITAC23_061
630000
9378600
1265
0
360
15
NSR
ITAC23_062
630000
9378400
1265
0
360
15
NSR
ITAC23_063
630000
9378200
1265
0
360
15
NSR
7
8
JORC Code, 2012 Edition – Itigi Drilling
Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
JORC Code explanation
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised
industry
standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate
calibration
of
any
measurement tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this would
be relatively simple (eg ‘reverse circulation
drilling was used to obtain 0.5 m samples
from which 3 kg was pulverised to produce
a 30 g charge for fire assay’). In other
cases more explanation may be required,
such as where there is coarse gold that
has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine
nodules)
may
warrant
disclosure of detailed information.
• Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
Commentary
•
AKN utilised Air Core (“AC”) drilling at
Itigi to obtain individual 0.5m samples,
which were reduced in size to produce a
sample of approximately 1 to 2kg in
weight. The samples were ticketed prior
to dispatch to the analytical laboratory,
pulverised to produce a pulp sample for
analysis.
•
The AC drilling results referred to in the
accompanying release were obtained
entirely by AC drilling with the sample
return connected to a cyclone and cone
splitter. Sampling has been done on a
single 0.5m by 0.5m basis.
•
The samples were analysed using a
handheld Olympus Vanta XRF unit.
•
AKN drilling included AC drilling with 3.5inch hammer.
•
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
•
All samples are weighed in the field and
samples will also be weighed at the lab
when submitted for analysis.
Recovery levels are considered suitable
and appropriate for this method of
sampling.
No relationship between sample recovery
and grade has been yet observed and no
sample bias is believed to have occurred.
Whether core and chip samples have been
geologically and geotechnically logged to
a level of detail to support appropriate
Mineral Resource estimation, mining
studies and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
If core, whether cut or sawn and whether
quarter, half or all core taken.
•
AC chips were logged for quantitative
and qualitative attributes with chips
stored in chip trays for future reference.
All drill holes were logged in full.
•
The preparation of the samples follows
industry practice for XRF sampling with
a small charge of the sample placed in a
•
•
Logging
•
•
•
Subsampling
techniques
•
•
If non-core, whether riffled, tube sampled,
•
•
Criteria
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
JORC Code explanation
rotary split, etc and whether sampled wet
or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all
stages
to
maximise
sub-sampling
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (ie lack of
bias) and precision have been established.
• The verification of significant intersections
by either independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
Commentary
CRM cup. A primary sample of 1 – 3kg
was retained for lab assay purposes.
•
Field QAQC was undertaken using
CRM’s.
•
The sample sizes are considered
appropriate given the nature and grain
size of the material being sampled.
•
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
•
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution
is sufficient to establish the degree of
geological
and
grade
continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been
•
•
•
Data
spacing and
distribution
•
•
•
•
•
•
•
•
•
•
•
•
•
All XRF readings from Itigi were
conducted in the field using an Olympus
Vanta XRF.
Samples were analysed in a clean,
contamination free environment.
Suitable settings and standards were
used on a daily basis to calibrate the unit.
The grade of significant intersections
has been verified by other senior
geological personnel associated with the
project.
The drilling database is managed by
Newexco Exploration, a Perth based
exploration consultancy group. All
drilling data resides on their NXDB
database
management
system.
Newexco is responsible for uploading all
analytical and other drilling data and
producing audited downloaded data for
use in various mining software
packages. The NXDB system has
stringent data entry validation routines.
All location data is collected in
WGS84/UTM Zone 36s.
No downhole survey methods were
completed.
AC Drill collars were surveyed with a
handheld GPS unit.
RL data was collected using a handheld
GPS. Variation is minimal across the
terrain.
The drilling was a first pass drilling
program for the area.
Drilling and sampling targeted surface
and subsurface Playa deposits.
Samples were collected on 0.5m
intervals.
Criteria
Orientation
of data in
relation to
geological
structure
Sample
security
Audits or
reviews
JORC Code explanation
applied.
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• The measures taken to ensure sample
security.
Commentary
•
•
The results of any audits or reviews of
sampling techniques and data.
•
No orientation bias was considered.
•
The chain of custody is managed by
AKN. The samples will be freighted
directly to the relevant laboratories for
analysis.
No independent audit or review has
been undertaken to date.
Section 2 Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
Exploration
done by other
parties
Geology
JORC Code explanation
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
• The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a license to
operate in the area.
• Acknowledgment and appraisal of
exploration by other parties.
Commentary
•
The Itigi project is located on
PL12352/2023 and the tenement is in
good standing.
•
•
Deposit type, geological setting and style
of mineralisation.
•
•
Drill hole
information
• A summary of all information material to
the under-standing of the exploration
results including a tabulation of the
following information for all Material drill
holes:
• easting and northing of the drill hole
collar
• elevation or RL (Reduced Level –
elevation above sea level in metres) of
the drill hole collar
• dip and azimuth of the hole
• down hole length and interception
depth
• hole length
• If the exclusion of this information is
•
Historical exploration over the project
area has been limited to exploration pits
dug to a nominal depth of 3m by Uranex
in 2010 to 2011.
The regional geology is dominated by
playa-lake
deposits
overlying
weathered
uranium-rich
granitoid
basement.
The two main local lithologies that are
interpreted to host the mineralisation
include 1) Mbuga Clay, which is a
transported sediment and 2) a saprolite,
which is interpreted as an in situ
weathering product of the basement
granitoids.
Drilling details are not provided.
Criteria
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
Reporting
Other
substantive
exploration
data
Further work
JORC Code explanation
justified on the basis that the information is
not Material and this exclusion does not
detract from the understanding of the
report, the Competent Person should
clearly explain why this is the case.
• In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high grades)
and cut-off grades are usually Material
and should be stated.
• Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical
examples of such aggregations should be
shown in detail.
• The assumptions used for any reporting
of metal equivalent values should be
clearly stated.
• These relationships are particularly important
in the reporting of Exploration Results.
• If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
• If it is not known and only the down hole
lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole
length, true width not known’).
Commentary
• Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported. These should
include, but not be limited to a plan view of
drill hole collar locations and appropriate
sectional views.
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and
high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
• Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples - size and
method of treatment; metallurgical test
results; bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large- scale step-out
drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main
•
•
No specific intervals are being reported.
Metal equivalent values have not been
used.
•
The program was designed to assess
the potential for surface and sub surface
(<15m) uranium mineralisation at Itigi.
•
Relevant diagrams have been included
within the main body of text.
•
Anomalous XRF readings have been
identified at Itigi, these samples will be
sent to the laboratory for an accredited
assay, where the results will be
tabulated for release.
XRF readings should be considered a
guide only.
This reporting method has been
deemed appropriate for this stage of
the project.
•
•
•
No other substantive data exists.
•
Once assay results have been received
and reviewed, further drilling and
geophysical work will be considered to
assess the potential of the Itigi project.
Criteria
JORC Code explanation
geological interpretations and future
drilling areas, provided this information is
not commercially sensitive.
Commentary
Share your feedback
Discover