Significant increase in Mkuju uranium assay results
Released
Released
Announcement PDF
Auking Mining Limited
ASX:AKN
Suite 2208, Level 22
127 Creek Street
Brisbane Queensland 4000
ABN 29 070 859 522
Phone 07 3535 1208
www.aukingmining.com
31 January 2024
ASX RELEASE
Significant increase in uranium assay results from Mkuju
Highlights
• Laboratory assay results have now been received from the initial exploration
program at the Mkuju Uranium Project, in southern Tanzania. Results from
recent rock chip, soil sampling and auger drilling are mostly significantly higher
than previously reported pXRF readings.
• Highlighted assay results include:
Auger drilling
MKAU23_020 3m @ 1,273ppm U3O8 incl 1m @ 3,350ppm U3O8
MKAU23_045 3m @ 250ppm U3O8 incl 1m @ 410ppm U3O8
Soil samples
Rock chip samples
MKSS006 510ppm U3O8
MKRS011 2,250ppm
MKSS016 8,800ppm U3O8
MKRS012 800ppm U3O8
MKSS052 960ppm U3O8
AuKing Mining Limited (ASX: AKN) has now received laboratory assay results from its
initial exploration program and these results are significantly higher than previously
reported pXRF field readings.
AuKing’s CEO, Mr Paul Williams, said Mkuju continues to emerge as a possible major
extension of the world class nearby Nyota Uranium Project that was sold by previous owner
Mantra Resources in 2011 for $1.16Bn.
“These latest laboratory assay results continue to highlight the very promising uranium
results from our initial exploration and drilling at Mkuju. In almost all cases where we
previously reported high pXRF readings from soil samples, rock chips and auger drilling, the
1
assays have come in at significantly higher levels. These results continue to provide AuKing
with confidence to proceed with its planned detailed drilling program at Mkuju at the end of
the wet season,” Mr Williams said.
Mkuju Assay Results
AuKing has now received laboratory assay results from soil, rock chip and auger drilling
samples taken as part of its Stage 1 exploration program at Mkuju in southern Tanzania.
These results are highlighted below and set out in full in Annexures A and B to this release:
Auger Drilling
HOLE NO
FROM
TO
Lab U ppm
pXRF U ppm
Lab
pXRF
MKAU23_014
0
1
160
159
1m @ 160 ppm
1m @ 159 ppm.
MKAU23_020
0
1
3350
1896
3m @ 1273 ppm
3m @ 774 ppm
MKAU23_020
1
2
390
353
MKAU23_020
2
3
80
75
MKAU23_035
7
8
130
151
1m @ 130 ppm.
1m @ 151 ppm
MKAU23_045
0
1
410
283
3m @ 250 ppm
3m @ 113 ppm
MKAU23_045
1
2
290
56
MKAU23_045
2
3
50
<LOD
Table 1 – Mkuju highlighted auger drilling assay results.
Soil and rock chip samples
Samples Details
Eastings
Northings
RL
MKSS001
MKSS006
MKSS016
MKSS042
MKSS052
MKRS011
Sample
Type
Soil
Soil
Soil
Soil
Soil
Rock chip
Lab
Assays
ppm U
243828
245340
243088
244228
245345
245345
8858853
8863665
8855926
8860510
8863661
8863661
723
702
757
711
722
722
480
510
8,800
170
960
2,250
499
481
6,213
156
652
1,344
MKSS053
MKRS012
Soil
Rock chip
245327
245327
8863658
8863658
723
723
410
800
327
549
Sample Code
XRF
ppm U
Table 2 – Mkuju Soil and Rock Chip Sample Assay Results
Key observations from the laboratory results include:
• Overall, a good correlation between the pXRF results derived from samples in the
field and the laboratory assays – where the pXRF readings were higher, so were the
assays and vice versa.
• Of interest however is the laboratory assays (for the higher-grade results) were
generally higher and in some cases by a factor of 30% as compared to the pXRF
readings; and
2
•
In the areas where high uranium results were achieved, the results were very high
and provide considerable encouragement with the future planned drilling program at
Mkuju.
Figure 1 – Location of soil and rock chip sample assay results
This announcement has been authorised by Paul Williams, CEO, AuKing Mining
Limited.
3
For more information, please contact:
Paul Williams
Chief Executive Officer
Mobile +61 419 762 487
p.williams@aukingmining.com
Gareth Quinn
Investor Relations
Mobile + 61 417 711 108
gareth@republicpr.com.au
About AuKing Mining
AuKing Mining (ASX:AKN) is a mining exploration company focused on uranium, copper and zinc
projects in both Tanzania and Australia.
AuKing is focused on the exploration and development of six uranium and copper projects in Tanzania
including:
Mkuju – near to the world class Nyota uranium project in southern Tanzania; the subject of significant previous
exploration
Manyoni/Itigi – the subject of significant exploration situated in central Tanzania, just west of Dodoma
Mpanda/Karema – prospective copper areas in western Tanzania that were the subject of historic mining
operations but largely untouched by modern exploration methods.
The Company also holds the Koongie Park Copper Zinc Project in Western Australia’s Halls Creek Region
hosts a JORC resource and is neighboured by several significant mining and development operations including
Nicholson’s Gold Mine and Savannah Nickel Mine. Koongie Park has already been the subject of significant
exploration drilling and analysis since the 1970’s, hosting over 300 RC and diamond drill holes consisting of
more than 60,000m of drilling in total.
AuKing recently announced the results of its Koongie Park Scoping Study on a proposal to commence mining
operations around a central processing facility at Sandiego.
For further information
www.aukingmining.com
4
Competent Persons’ Statement
The information in this report that relates to exploration results at the Mkuju Project is based
on information compiled by Mr Chris Bittar who is a member of the Australasian Institute of
Mining and Metallurgy. Mr Bittar is an employee of AuKing Mining Limited and has sufficient
experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity which they are undertaking to qualify as a Competent
Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves.’ Mr Bittar consents to the inclusion in the
report of the matters based on his information in the form and context in which it appears.
ANNEXURE A – Mkuju auger drilling results (Full Table)
(UTM37SWGS84)
(UTM37SWGS84)
9
253178
8858797
665
Results
(NSR = No Significant
results)
NSR
15
253181
8858793
665
NSR
MKAU23_003
14
253187
8858789
665
NSR
MKAU23_004
13
253560
8858792
658
NSR
MKAU23_005
5
253982
8858791
637
NSR
MKAU23_006
6
254389
8858798
627
NSR
MKAU23_007
12
252577
8859616
660
NSR
MKAU23_008
9
253168
8859618
660
NSR
MKAU23_009
14
253581
8859622
639
NSR
MKAU23_010
2
253073
8860413
647
NSR
MKAU23_011
13
253061
8860411
646
NSR
MKAU23_012
7.5
252649
8860417
647
NSR
MKAU23_013
3
253976
8859612
625
NSR
MKAU23_014
3.8
243828
8858849
723
refer to table 1
MKAU23_015
12
243679
8858061
705
NSR
MKAU23_016
8
243081
8855926
757
NSR
MKAU23_017
7
253979
8859609
625
NSR
MKAU23_018
9
245184
8863469
705
NSR
MKAU23_019
11
245188
8863463
705
NSR
MKAU23_020
13
245343
8863664
702
refer to table 1
MKAU23_021
12
245548
8863517
690
NSR
MKAU23_022
12
245948
8863508
677
NSR
MKAU23_023
18
244552
8863519
701
NSR
MKAU23_024
15
244968
8863505
698
NSR
MKAU23_025
7
244571
8861243
682
NSR
MKAU23_026
11.5
243147
8858848
695
NSR
MKAU23_027
12.5
242898
8858069
709
NSR
MKAU23_028
8
253070
8859916
662
NSR
HoleID
DEPTH
MKAU23_001
MKAU23_002
EAST
NORTH
RL
5
MKAU23_029
11
253279
8859089
651
NSR
MKAU23_030
12
244813
8853192
719
NSR
MKAU23_031
9
245421
8853179
716
NSR
MKAU23_032
8
245631
8853189
704
NSR
MKAU23_033
10
246419
8853172
705
NSR
MKAU23_034
9
244627
8860951
698
NSR
MKAU23_035
11
244219
8860514
698
refer to table 1
MKAU23_036
11
244498
8858007
735
NSR
MKAU23_037
9
244097
8858024
725
NSR
MKAU23_038
11
244229
8858838
722
NSR
MKAU23_039
11
244630
8858835
714
NSR
MKAU23_040
9
243297
8858029
725
NSR
MKAU23_041
13
242825
8858810
699
NSR
MKAU23_042
9
242878
8858130
702
NSR
MKAU23_043
13
244087
8856011
740
NSR
MKAU23_044
11
244574
8856004
732
NSR
MKAU23_045
9
245307
8863557
744
refer to table 1
MKAU23_046
11
243695
8855999
711
NSR
MKAU23_047
11
242794
8856820
747
NSR
MKAU23_048
2
244396
8853978
742
NSR
MKKAU23_001
10
252192
8853198
711
NSR
MKKAU23_002
8
252402
8853734
701
NSR
MKKAU23_003
7.5
252634
8854139
699
NSR
MKKAU23_004
11
252963
8854500
694
NSR
MKKAU23_005
11
253092
8854993
690
NSR
MKKAU23_006
10
253099
8855457
690
NSR
MKKAU23_007
9
253296
8855859
685
NSR
MKKAU23_008
6
253496
8856181
672
NSR
ANNEXURE B – Mkuju soil and rock chip sample assay results (Full Table)
PROJECT
SITETYPE
SAMPLE NO
ORIGEAST
ORIGNORTH
ORIG RL
U_ppm
Mkuju
Soil
MKSS001
243828
8858853
723
480
Soil
MKSS003
243818
8858456
717
20
245179
8863475
705
10
245264
8864181
693
243050
8858083
705
243807
8858798
722
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
MKSS002
MKSS004
MKSS005
MKSS006
MKSS007
MKSS008
MKSS009
MKSS010
MKSS012
243723
245185
245340
245287
243424
8858630
8863470
8863665
8864198
8858023
715
705
40
50
702
510
692
20
702
20
10
<10
20
6
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Soil
MKSS013
243810
Soil
MKSS015
243419
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
Soil
MKSS014
MKSS016
MKSS017
MKSS018
MKSS019
MKSS020
MKSS021
MKSS022
MKSS023
MKSS024
MKSS025
MKSS026
MKSS027
MKSS030
MKSS031
MKSS032
MKSS033
MKSS034
MKSS035
MKSS036
MKSS037
MKSS038
MKSS039
MKSS040
MKSS041
MKSS042
MKSS043
MKSS044
MKSS045
MKSS046
MKSS048
MKSS049
MKSS050
MKSS051
MKSS052
MKSS053
MKSS054
MKSS055
MKSS056
MKSS057
MKSS058
MKSS059
MKSS060
8858821
722
10
243976
8858847
722
20
243088
8855926
757
8800
243520
8856001
745
40
246299
8853142
705
10
244791
8853748
730
30
244838
8853716
730
30
245142
8853350
706
10
245907
8852974
706
30
245714
8853345
718
30
244371
8853891
730
30
244968
8854160
722
<10
246230
8852537
691
10
244087
8860174
709
<10
244228
8860510
699
170
251583
8861806
676
<10
241921
8850203
728
<10
241346
8860697
769
10
244628
8860960
698
50
245327
8863658
702
410
245310
8863559
704
110
245003
8863377
700
30
247030
8865098
677
243456
243889
245018
244820
244823
243499
245452
244363
244438
246967
246207
244122
244563
249967
241342
244558
245345
245326
245244
248512
245819
8856827
8855994
8856002
8853196
8853737
8853915
8854772
8852902
8853858
8854056
8854128
8852549
8860198
8861238
8860607
8860709
8860970
8863661
8863593
8863555
8863734
8864076
742
742
734
718
730
730
707
696
730
734
783
692
712
682
681
768
686
700
703
705
679
675
10
60
10
60
10
50
10
30
10
20
<10
20
10
10
<10
10
10
960
20
30
<10
<10
20
7
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Mkuju
Soil
MKSS062
243965
8858865
721
Soil
MKSS064
255358
8855687
655
255298
8855888
655
40
243672
8858064
706
<10
243088
8855926
757
<10
251724
8860303
668
<10
252714
8859976
664
40
241346
8860697
770
<10
245327
8863658
702
247030
8865098
677
<10
254971
8855307
641
<10
Soil
Soil
Soil
Soil
MKSS063
MKSS065
MKSS066
MKSS067
Rock Chip
MKRS001
Rock Chip
MKRS003
Rock Chip
MKRS006
Rock Chip
MKRS008
Rock Chip
MKRS010
Rock Chip
MKRS012
Rock Chip
MKRS015
Rock Chip
MKRS017
Rock Chip
Rock Chip
Rock Chip
Rock Chip
Rock Chip
Rock Chip
Rock Chip
Rock Chip
MKRS002
MKRS005
MKRS007
MKRS009
MKRS011
MKRS014
MKRS016
MKRS018
247876
255372
248728
243996
251583
252723
252706
245345
248512
252975
255748
8858049
8855757
8847599
8858846
8861806
8859984
8859947
8863661
8863734
8855365
8854654
70
709
<10
655
70
708
720
677
663
667
40
30
30
<10
20
40
702
2250
680
<10
683
660
800
<10
20
8
JORC Code, 2012 Edition – Significant increase in uranium assay results
from Mkuju.
Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
JORC Code explanation
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or
systems used.
• Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done
this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 0.5 m
samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules)
may warrant disclosure of detailed information.
Drilling
techniques
•
Drill type (eg core, reverse circulation, openhole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
Drill sample
recovery
•
Method of recording and assessing core and
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential
loss/gain of fine/coarse material.
•
All samples are weighed in the field and
weighed at the lab when submitted for
analysis.
Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
•
Logging was both brief qualitative description
of individual rock chips.
•
•
Logging
•
Commentary
•
AKN utilised Auger drilling at Mkuju to obtain
individual 1m samples, which were reduced
in size to produce a sample of approximately
1 to 2kg in weight. The samples were
labelled prior to dispatch to the analytical
laboratory, pulverised to produce a pulp
sample for analysis.
•
The Auger drilling results referred to in the
accompanying release were obtained
entirely by Auger drilling with the samples
collected by scoop and placed into a plastic
sample for XRF analysis and submission to
the lab.
•
The samples were analysed using a
handheld Olympus Delta XRF unit.
•
Rock chip sampling was undertaken over
selected areas on both a visual basis and
with the use of a handheld spectrometer
(RS230) to confirm the geological
interpretation.
•
Soil samples were collected over specific
target areas.
•
The rock chip and soil samples were
analysed using a handheld Olympus Delta
XRF unit and a handheld RS230.
•
Surface samples and drill samples submitted
to the lab for analysis were prepared at SGS
Laboratory in Mwanza, Tanzania where the
samples were dried, weighed and crushed to
>75% passing 2mm.
•
The crushed sample was pulverized to >85%
passing 75 microns and sent to ALS
Johannesburg, South Africa.
•
Auger drilling results have been reported in
annexure A and significant intersections
reported in Table 1.
•
Soil and rock chip sampling results have
been reported in annexure B and significant
intersections reported in Table 2.
•
Auger drilling was completed with 4WDmounted auger rig.
9
Criteria
Sub-sampling
techniques
and sample
preparation
JORC Code explanation
Resource estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the relevant
intersections logged.
• If core, whether cut or sawn and whether
quarter, half or all core taken.
•
•
•
•
•
Quality of
assay data
and
laboratory
tests
•
•
•
Verification
of sampling
and assaying
Location of
data points
Data spacing
and
distribution
•
•
•
•
•
•
•
•
•
•
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
For
geophysical
tools,
spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model, reading
times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted
(eg standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (ie lack of bias) and
precision have been established.
The verification of significant intersections by
either independent or alternative company
personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been
applied.
Commentary
•
•
Field QAQC was undertaken using CRM’s.
The
sample
sizes
are
considered
appropriate given the nature of the rock chips
and soil samples collected.
•
•
All XRF readings from Mkuju were
conducted in the field using an Olympus
Delta XRF.
Samples were analysed in the field at the
time of collection.
Suitable settings and standards were used
on a daily basis to calibrate the unit.
Analysis of the samples at ALS was by four
acid ICP – AES, ALS code ME – ICP61.
The instrument was ICP-AES.
•
No verification conducted.
•
All location data is collected in WGS84/UTM
Zone 37s.
Sample and collar locations were surveyed
with a handheld GPS unit.
The RL for each collar was based on
topographic data over the project area.
The drilling was a first pass drilling program
for the area.
Drilling and sampling targeted significant
anomalies identified in regional radiometric
surveys completed in mid-2007.
Samples were collected on 1m intervals.
Rock chip and soil sampling was completed
over a variety of areas which resulted in
considerable variation in the sample spacing
and orientation.
Rock chip and soil samples targeted
radiometric anomalies.
•
•
•
•
•
•
•
•
•
•
10
Criteria
JORC Code explanation
Commentary
Orientation of
data in
relation to
geological
structure
•
•
No orientation bias was considered.
Sample
security
•
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
The measures taken to ensure sample
security.
•
Audits or
reviews
•
The results of any audits or reviews of
sampling techniques and data.
•
The chain of custody is managed by AKN.
The samples will be freighted directly to the
relevant laboratories for analysis.
No independent audit or review has been
undertaken to date.
•
Section 2 Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
Exploration
done by other
parties
Geology
Drill hole
information
JORC Code explanation
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or
national park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments
to obtaining a license to operate in the area.
• Acknowledgment and appraisal of exploration
by other parties.
Commentary
•
The Mkuju project is located on
PL12184,PL12185,PL12186,
PL12187,
PL12189,PL12192,PL12606,
PL12607,
PL12608 and the tenement package is in
good standing.
•
Deposit type, geological setting and style of
mineralisation.
•
• A summary of all information material to the
under-standing of the exploration results
including a tabulation of the following
information for all Material drill holes:
• easting and northing of the drill hole collar
• elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
• dip and azimuth of the hole
• down hole length and interception depth
• hole length
• If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the
case.
•
•
•
MRU completed a high-resolution helicopterborne radiometric survey over the entire
Mkuju River Project area in mid-2007 which
resulted in the identification of several
uranium anomalies requiring field evaluation.
Geological mapping, ground radiometrics
and trenching was completed on various
target areas. Although preliminary in nature,
the field observations were positive with
visible
uranium
mineralisation
being
recorded in trenches at a number of the
targets.
The regional geology is dominated by Karoo
Basin siltstone and sandstone sediments.
The mineralisation is interpreted to be
analogous to ‘roll-front’ uranium deposits,
specifically hosted in muti-stacked Karoo
Basin sandstone and siltstone sequences.
Auger drill hole collar locations and a
summary of the significant intersections are
shown in Annexure A and Table 1.
11
Criteria
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
Reporting
Other
substantive
exploration
data
Further work
JORC Code explanation
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of
high grades) and cut-off grades are usually
Material and should be stated.
• Where aggregate intercepts incorporate short
lengths of high grade results and longer
lengths of low grade results, the procedure
used for such aggregation should be stated
and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
• These relationships are particularly important in
the reporting of Exploration Results.
• If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
• If it is not known and only the down hole lengths
are reported, there should be a clear statement
to this effect (e.g. ‘down hole length, true width
not known’).
Commentary
• Intersection calculations are weighted by
sample length.
• Samples are a constant length of 1m.
• Reported intersections are primarily based on
a cut-off of 50 ppm U with a maximum of 2m
sub-grade.
• No top cutting of grades was undertaken.
• Metal equivalent values have not been used.
•
No relationship between mineralisation
widths and sample size or length.
• Appropriate maps and sections (with scales)
and tabulations of intercepts should be included
for any significant discovery being reported.
These should include, but not be limited to a
plan view of drill hole collar locations and
appropriate sectional views.
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
• Other exploration data, if meaningful and
material, should be reported including (but not
limited
to):
geological
observations;
geophysical survey results; geochemical
survey results; bulk samples - size and method
of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics;
potential deleterious
or
contaminating substances.
• The nature and scale of planned further work
(e.g. tests for lateral extensions or depth
extensions or large- scale step-out drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
•
Relevant diagrams have been included
within the main body of text.
•
This reporting method is considered
balanced and has
been deemed
appropriate for this stage of the project.
•
No other substantive data exists.
•
Further AC drilling is planned in the
mineralised and anomalous areas to
test for further mineralisation at depth.
12
Share your feedback
Discover